Products

Product Name: PF-QD

Product Summary: PF-QD is a quick drying solvent for zero residue cleaning and degreasing. It is ideally suited for the removal of petroleum based oils, stamping oils, cutting oils, rust preventing oils, lubricating oils, fingerprints etc. Extremely low substrates attack potential for most commercial resins, plastics, urethanes and synthetic rubbers. PF-QD is a worker friendly, environmentally responsible, 100% volatile, non-ozone depleting speciality industrial solvent. 

Product Name: PF 

Product Summary: Excellent residue free solvent degreaser for surface preparation and general purpose cleaning in aerospace manufacture and MRO.  Controlled evaporation rate reduces solvent consumption and VOC emissions. PF is classified as combustible and is a non conductive fluid prior to evaporation - ideal for electrical cleaning. The wipe system reduces the requirement for additional cloth rags, speeding up the cleaning process. PF has passed compatibility testing with composites and coatings such as painted and unpainted surfaces, plastics, epoxy, varnish, baked enamel, baked powder coatings, and silicone. PF is worker friendly, environmentally responsible, 100% volatile and non-ozone depleting.

Product Name: PF-145HP

Product Summary: A full strength, high performance exceptionally strong solvent. User safety and environmental compatibility were prime considerations during its formulation. Contains no halogenated solvents or suspected carcinogens, teratogens or mutagens. It combines safety, exceptional cleaning strength and quick, total evaporation. Leaves no residue after complete evaporation. It is similar in solvent strength to the chlorinated and hazardous solvents it is intended to replace. PF-145HP is suitable for use in parts washers. It has a much longer useful life than most full strength solvents. It is a 100% volatile, non-ozone depleting, non-toxic and environmentally responsible solvent blend.

Product Name: PF Solvent Degreaser

Product Summary: PF Solvent Degreaser was designed to replace traditional fast evaporating solvents such as Trichloroethane. It is a full strength solvent/degreaser for cable cleaning prior to jointing, maintenance of cables, switchgear and network equipment and electrical equipment cleaning and degreasing. It removes oils, soils, tar and bitumen residues. PF Solvent is 100% volatile and leaves no residue. This residue free cleaning ensures no earth tracking or local hot spots. Controlled evaporation allows a significant reduction in solvent consumption and VOC emissions to the atmosphere. It is worker friendly, environmentally responsible and non-ozone depleting. Designed to IEEE Recommendations.

Product Name: d'Gel

Product Summary: d'Gel is a high performance cleaner of cables, tools and equipment. It was specifically developed for the safe and easy removal of petroleum, polyethylene and silicone based gels from filled copper and fibre optic communication cables. d'Gel removes grease, tar, oils, wax, resin and gum from cables, tools, painted surfaces and equipment. It cleans and removes gels and blocking compounds without removing ID inks. d'Gel is equally effective with both copper and fibre optic cables and is recommended for fibre optic ribbon matrix cleaning. d'Gel is compatible with all cables, cable jackets and jointing accessories. It is a 100% volatile, environmentally responsible, non-ozone depleting and worker friendly solvent

Product Name: EE Pressure Testing Solution

Product Summary: EE Pressure Testing Solution is ideal for safely and positively identifying leaks associated with pressurised systems and gas pressure testing. The product foams/ bubbles when exposed to a gas leak in lead or polyethylene cable sheath, sleeves, splice cases, air pipes, fittings and associated equipment. The ready to use solution can be used at temperatures as low as -13°C. It meets exacting telephone industry specifications and meets or exceeds Bellcore specifications as environmentally responsible without sacrificing any performance qualities. EE contains no ethylene glycol and is both user friendly and environmentally safe. Classified as non toxic, non hazardous and non regulated.

Product Name: Sealant Remover

Product Summary: Heavy duty degreaser for sealant & adhesive residue removal. It is 100% volatile, environmentally responsible, worker friendly and non-ozone depleting

Product Name: PF AquaForte

Product Summary: An alternative to solvent cleaners for surface preparation in aerospace and other industries. PF AquaForte is a water based cleaner for surface cleaning and degreasing in manufacturing, fabrication and maintenance. Ideal replacement for solvent based cleaners that provides effective cleaning of sealant residues, fabrication soils and cutting fluids on metals, composites, acrylics, polycarbonates and plastics. PF AquaForte evaporates at roughly the same rate as water and was designed to replace traditional fast evaporating solvents. Compatible with surfaces (metal, composites and plastic) found in aerospace and defence cleaning and maintenance. It has been tested for paint adhesion and softening, sealant adhesion, stress crazing of sensitive materials, sandwich corrosion and freedom from corrosive action to an aerospace standard of conformity.

Product Name: Techlube M

Product Summary: Techlube M is a pourable, high performance water based cable lubricant with microspheres specially designed for the telecoms industry. This product is ideal for the installation of fibre, light weight copper, CATV cables and sub-duct installation. Duct pre-lubrication reduces friction and risk in difficult cable pulls. Techlube M does not contain any salt, detergent, paraffin or grease which can degrade cable jackets or cause hotspots. It has passed compatibility testing with materials used in power cable accessories, joints and cable jackets. Its string & cling consistency = perfect adhesion onto cable in wet weather & resistance to wash off in water filled ducts. Retains duct lubrication for several months assisting in additional cable pulls to same duct. Techlube M is biodegradable and non toxic for environment and staff safety.

Product Name: Techlube Multi

Product Summary: Techlube Multi is an all purpose water based cable lubricant ideally suited for many general cabling projects. It provides superior friction reduction between cable and all forms of conduit, including multiple concrete duct. Duct pre-lubrication reduces friction and risk in difficult cable pulls. Techlube Multi does not contain any salt, detergent, paraffin or grease which can degrade cable jackets or cause hotspots. It has passed compatibility testing with materials used in power cable accessories, joints and cable jackets. Its string & cling consistency = perfect adhesion onto cable in wet weather & resistance to wash off in water filled ducts. Retains duct lubrication for several months assisting in additional cable pulls to same duct. Techlube Multi is biodegradable and non toxic for environment and staff safety.

Product Name: Techlube FO

Product Summary: Fibre optic and sub-duct installation lubricant with high elasticity for reduced consumption. This is a pourable, low viscosity water based lubricant designed for friction reduction in cable pulling installations of both fibre optic and light copper cable underground systems. Duct pre-lubrication reduces friction and risk in difficult cable pulls. Techlube FO does not contain any salt, detergent, paraffin or grease which can degrade cable jackets or cause hotspots. It has passed compatibility testing with materials used in power cable accessories, joints and cable jackets. Its string & cling consistency = perfect adhesion onto cable in wet weather & resistance to wash off in water filled ducts. Retains duct lubrication for several months assisting in additional cable pulls to same duct. Techlube FO is biodegradable and non toxic for environment and staff safety.

Product Name: Techlube PHD

Product Summary: Pourable, high performance water based cable lubricant for medium weight and lighter cable installations. It provides superior friction reduction between cable and all forms of conduit and dries slowly to form a thin friction reducing film with retains slip. Duct pre-lubrication reduces friction and risk in difficult cable pulls. Techlube PHD does not contain any salt, detergent, paraffin or grease which can degrade cable jackets or cause hotspots. It has passed compatibility testing with materials used in power cable accessories, joints and cable jackets. Its string & cling consistency = perfect adhesion onto cable in wet weather & resistance to wash off in water filled ducts. Retains duct lubrication for several months assisting in additional cable pulls to same duct. Techlube PHD is biodegradable and non toxic for environment and staff safety.  

Product Name: Techlube HD

Product Summary: Heavy duty, high performance water based lubricant for heavy cables and difficult pulls. It provides superior friction reduction between cable and all forms of conduit, including concrete duct. Duct pre-lubrication reduces friction and risk in difficult cable pulls. Techlube HD does not contain any salt, detergent, paraffin or grease which can degrade cable jackets or cause hotspots. It has passed compatibility testing with materials used in power cable accessories, joints and cable jackets. Its string & cling consistency = perfect adhesion onto cable in wet weather & resistance to wash off in water filled ducts. Retains duct lubrication for several months assisting in additional cable pulls to same duct. Techlube HD is biodegradable and non toxic for environment and staff safety. Where large quantities of lubricant are needed, Techlube HD is pumpable.

Product Name: Cable Ease

Product Summary: Specialised blowing lubricant with silicone to provide superior friction reduction for cable installations and telecommunication cable placing operations using blowing and air carrying techniques. Thanks to its low surface tension, it atomizes when blown, which enables air flow to carry the lube further into the duct, allowing longer runs. It spreads through the duct or sub-duct, leaving a thin film of lubricant on the interior walls and will not dry out during installation or interrupt the flow.

Product Name: PF Anti Bac

Product Summary: Heavy duty antibacterial hand cleaning wipe. Allows safe and effective waterless hand cleaning in the field. Removes oils, greases, combustion and tar residues. Tested and proven effective against Weil's Disease and E-Coli. PF Anti Bac is a high specification double-sided smooth/ abrasive wipe with a highly effective foaming cleaning solution. Contains rehydrant to prevent skin dryness.